No studio setup is complete without a few reliable instrument mics on hand, and this pair of Rode NT55 condenser microphones provides a versatile solution for a variety of instruments, as well as vocals. Clip these thin condenser mics around the drum kit, and choose from three attenuation settings (0dB, -10dB or 20dB) and three high-pass filter levels (flat, 75 or 150 Hz) to tweak your sound just right.
This kit comes with the mics, two additional mic heads, two foam windscreens and a pair of mic stand clips to get you set up right out of the box. The NT55 matched pairs come supplied with a Rode zip pouch. Each mic connects to a standard XLR cable for a wide variety of uses, from house systems to digital audio interfaces. The 1/2-inch Rode NT55 condenser microphones take up little studio space and don't weigh down boom stand arms.
Features
- Acoustic Principle Pressure Gradient
- Active Electronics JFET impedance converter with bipolar output buffer
- Capsule 0.50"
- Address Type End
- Frequency Range 20Hz - 20kHz
- Output Impedance 100?
- Maximum SPL 136dB SPL (@ 1kHz, 1% THD into 1K? load)
- Maximum Output Level 8.0dBu (@ 1kHz, 1% THD into 1K? load)
- Sensitivity -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Equivalent Noise Level (A-weighted) 15dB-A
- Weight 110.00gm
- Dimensions 145.00mmH x 20.00mmW x 20.00mmD
- Output XLR